Front License Plate Bracket Lincoln Town Car

Some states require license plates on both the front and the back of a vehicle. Not all vehicles are equipped with a front license plate bracket. Brackets are made with the contours of a bumper in mind. When the bracket is installed properly, spacers are first attached to the bumper and then the bracket is attached to the spacers.

Hi All.I'm getting a 1979 Lincoln Continental Town Car and need a front license plate on it.what bracket will best attach to the bumper?

  1. 1998-2002 Lincoln Town Car License Plate Bracket, Lincoln Town Car License Plate Bracket, Action Crash License Plate Bracket SKU: Action Crash FO1068111 Front License Plate Bracket; Made Of Plastic Body Mechanical & Trim Front 98-02 Lincoln License Plate Bracket.
  2. Lincoln Town Car 2007, Front Bumper License Plate Bracket by K-MetalĀ®. BETTER - Standard Line. License plate brackets make it easy and convenient to mount license plates, but their usual mounting locations on the bumper make them.

Step 1

Measure the front bumper from side to side using a tape measure to find the center.

Step 2

Measure the front bumper from the top of the bumper to its bottom.

Step 3

Place the license plate bracket on the center mark so that its four corners are centered from side to side and from top to bottom on the bumper.

Step 4

Step 5

Push a pen through each of the four corner holes of the bracket and place guide marks on the bumper.

Step 6

Step 7

Pre-drill 1/8-inch deep guide holes at each of the four corner marks using an electric drill with an 1/8-inch bit.

Step 8

Place the bracket back on the bumper so that it lines up with the four holes.

Step 9

Insert the four mounting screws that came with the bracket into the four holes.

Step 10

Screw the screws down until the bracket is secured to the bumper.

Step 11

Step 12

Insert the four corner screws through the four holes in the plate that hold the plate to the bracket.

Items you will need

  • Universal front license plate bracket
  • Electric drill
  • 1/8-inch drill bit
  • 4 license plate bracket mount to bumper screws
  • 4 license plate mount to bracket screws
  • Screwdriver
Front License Plate Bracket Lincoln Town Car

C6 Corvette Front License Plate Bracket

  • red car image by Istvan Ferge from Fotolia.com

Front License Plate Bracket

More Articles